Household Mop Stick are healthier when stored after use.
No matter which Household Mop Stick is used, it will become a breeding ground for bacteria and other microorganisms after repeated use and long-term exposure to a cool and humid environment. After the mop at home is used up, put it directly in the bathroom without wringing it out or hanging it up. In this case, bacteria can easily breed. What is the correct way?
1. No matter what kind of Household Mop Stick, it must be washed after use. The mop is used to clean up the dust. After cleaning, the inside of your mop is full of dust. If it is not cleaned in time, the dust will penetrate into the mop over time. After mopping, the mop is covered with dust, which contains bacteria and even germs. Only by cleaning it in time can you maintain health and safety.
2. Be sure to wring out the water after cleaning the Household Mop Stick. If you don't wring it out, the water droplets will fall on the floor drop by drop, with water marks everywhere. In addition, dampness can easily breed bacteria and germs, so remember to wring out the water.
3. Hang up the wrung out Household Mop Stick and put it in a ventilated and sunny place, balcony. Hanging it up helps the mop to dry and reduce the growth of bacteria. Ventilation and sunlight can better kill bacteria and viruses. It is recommended to put a mop rack on the balcony, or install a mop rack.
Good storage is not only beautiful and convenient, but also healthy and safe.
How to choose a high-quality Sponge Mop?
There are many kinds of mops in the supermarket. Once you have a lot of options, you will inevitably be undecided. My home has a tiled floor. If the mop does not absorb water well, the floor will be wet after mopping. It will not be easy to walk if it is not blown dry. Not only is it easy to slip, but it is also easy to get foot prints everywhere. Therefore, I have also bought and used many kinds of mops. The following briefly introduces how to choose a Sponge Mop.
1) Ordinary cotton thread and cotton cloth mop: This is the most traditional mop, and the price is cheap. Cotton material prefers to be dry. More precisely, it can show its advantages when used on cement floors. Once the cotton mop is damp, the hair attached to it is difficult to clean off. After wiping it, wipe another place, there will be marks, and the black marks will not be wiped clean. The debris sticks to the mop, it is brought to the ground as soon as it is mopped, and then it has to be swept. Therefore, cotton mops should be mopped as dry as possible. And before mopping the floor, it is best to clean up the hair on the floor or use a vacuum cleaner. It is necessary to twist the water by hand when washing it.
2) Microfiber mop: The price of the microfiber mop is more expensive. Due to the special technology, the flat mop can touch the ground vertically, which changes the shortcoming of the parallel contact between the cotton thread and the ground. Due to the "close contact" with the ground, friction generates static electricity, which can more thoroughly remove the dirt in the gap, wipe the ground with almost no wear, and can also be used for polishing and waxing. But I always think that this kind of mop should be more suitable for wooden floors.
3) The collodion mop has strong water absorption. It does not need to sweep the floor before mopping. It forms static electricity through air convection and friction. It can suck dust, sand and hair without hurting the ground. When using, the hands do not need to be touched with water and dirt, which is simple and clean. Especially the mop that replaces the rubber cotton head is economical and affordable. In fact, mops of any material must be cleaned with neutral detergent. As a cleaning tool, it is necessary to clean itself, and it is best to put some disinfectant water for disinfection. But not all mops can bask in the sun. Generally, mops made of ultra-fine fibers, non-woven fabrics and collodion materials should be dried. When exposed to the sun, the materials will shrink and deform, and the adsorption effect will be weakened. The sponge mop is about to get out of the sun, because the mop will shed hair and have a peculiar smell because it is wet for a long time. Also, try not to stack mops on the ground. Flat mops should be dragged with their heads up, while thin mops should be hung in the air to let the mops breathe fresh air. Everyone knows that the trendy mop is best for mopping the floor. If you do not use a sponge mop, if you are afraid of sprinkling water on the dry mop, the amount of water is always poor, you can spray the mop with a watering can, so that the mop is not dry or wet is just right. After mopping, wipe and dry while you are done. No watermark yet. If possible, you can configure two mops according to your needs, one flat dry mop and one thin strip wet mop, and the mop head should be able to rotate 360 degrees to remove dead spots. When choosing a mop, it depends on whether there is a mop head with the same product. If it is not a similar product, it may not be installed.
How to clean a dirty mop head?
When it comes to mops, everyone is no stranger, right? Because these are the daily necessities that are often used in daily life, and don’t underestimate it, it is still very useful, because if you want to make your home clean, you have to use it to help, it will make the air at home Become a whole new look. If the mop is used at home for a long time, it will be particularly dirty, and it will emit a particularly unpleasant smell, then there are many coups to make the mop head clean. Presumably many people are still worrying about the dirty mop head. Let me teach you some coups and see if you think of it. Let's find out!
1. Tea
It contains a lot of adsorption, so it can also effectively remove some odors. In daily life, you can pour the rest of the tea you usually drink into the cleaning mop, and let the mop soak in the water for several hours. At the same time, in the process of soaking, it is necessary to wash it back and forth continuously. After washing, the moisture of the mop should be controlled dry. It is best to put it in the sun to fill it.
2.Lemonade
You can pour some lemonade into the mopping bucket, put the mop in the bucket, and at the same time soak it for a longer time, and finally clean it and place it in a place that can be exposed to the sun. This effect is very effective. It is good, it can remove some of the peculiar smell of the mop very well, and it also emits the scent of lemon when mopping the floor, so as to relieve the air in the home.
3. Bleach
You can use the cap of the bleach bottle as a container. You can properly pour it into the mop to be cleaned into the container. At this time, you can also add some hand soap or washing powder, and then put the mop in the water for 20 minutes. , Repeatedly wash the mop several times with clean water, dry it and you can continue to use it. And this method is also used by many people in daily life.
Various mop head replacement methods
The current mop is not like a traditional mop and needs to be thrown away after use. The current mop can directly replace the mop head, which is very convenient. How to change the mop head? Here is an introduction to the various mop head replacement methods.
How to change the sponge mop head?
The double-folding patch type sponge mop is mainly made of two ABS plastic sheets attached to the bottom of the cotton head. When removing the cotton head, you only need to hold the middle of the cotton head with your right hand, and gently push it back to remove the cotton head. , When installing the cotton head, you only need to insert the four feet on the patch into the card slot at the bottom of the cotton mop, which is very simple and fast.
How to change the roller sponge mop head?
The roller squeezing cotton head usually has four screw holes, and the pitch of the four screw holes basically has a certain size. Ordinary cotton heads of the same length can be used on different mops. The function of the four screw holes is that the screws connect the left and right hooks of the mop with the cotton head through the screw holes, and the replacement and installation of the mop head only need to unscrew or install the screws.
How to change the rotating mop head?
Step on the cloth disc first, preferably close to the edge of the mop disc. Then turn the mop rod to make the screw mark to the foot position, and tilt it toward the reverse mark, that is, it can be separated from the cloth pan. If you fail to align the screws, you can't separate them from the cloth pan. Place the new cloth pan on the ground and align the mop head disc with the cloth pan. Finally, press the cloth pan down and make a close sound.
How to use twisiting mop correctly at home
Now every house has twisiting mop. When the ground is contaminated with dust, it must be cleaned in time. The use of a mop is also a method. If you use the wrong method, you cannot clean the ground. The following editor teaches you how to use twisiting mop correctly.
First, dry mopping: If there are many water marks on the ground, you can generally use dry mopping to wipe off the water marks on the ground.
Second, semi-dry mop: If you want to remove dust from the ground and don't want to leave water marks, you can wipe the ground with a semi-wet and semi-dry twisiting mop.
Third, water mopping: If there is more dirt on the ground, you can mop the ground after soaking it. If there are water marks on the ground, the ground should be dragged dry.
Fourth, add detergent to mop: For floor grease, you need to mop the floor with detergent and then rinse with water to remove residual detergent.
Fifth, push dust: dust push is a special mopping, in order to enhance the ability to attach dust, you can add dust push oil on the dust push screen. The application of dust push is simple and labor-saving, which can achieve the effect of dust removal and cleaning.